SKU | Name | Image | Desc | Brand | Price | Qty | |
|
|
|
|
Daylight Sensor for use with Hi-Pro 360 Lamps - Photo-cell day-light sensor module for use with the lamps: S13120 S13121 S13122 - Finish: White - Length: 1-3/4" - Diameter: 1-3/4" |
|
|
|
|
|
|
|
|
Motion Sensor for use with Hi-Pro 360 Lamps - Microwave Sensor - Motion sensor MR module for use with the lamps: S13120 S13121 S13122 - Finish: White - Length: 1-3/4" - Diameter: 1-3/4" |
|
|
|
|
|
|
|
|
Former 480V 347V Down to 277V - Step Down Auto-transformer (Non-Isolated) |
|
|
|
|
|
|
|
|
In-Line Noise Filter - For Single Fixture - VAC 473K - 120V - Small |
|
|
|
|
|
|
|
|
In-Line Noise Filter - For Multiple Fixtures - VAC 225K - 120V - Large - Interference Suppression Capacitor for Single or Multiple fixtures on the same circuit |
|
|
|
|
|
|
|
|
In-Line Noise Filter - For Multiple Fixtures - VAC 684K - 277V - Large - Interference Suppression Capacitor for Single or Multiple fixtures on the same circuit |
|
|
|
|
|
|
|
|
IOT Z-Wave Plug-in Appliance Module - White - Height: 1-1/2" x Width: 2-1/8" x Length: 3-1/4" - White - Turns ON/OFF Incandescent, CFL or LED lamps and AC operated electrical appliances - LED backlit Key for manual ON/OFF and status indicator - Z-Wave Plus Certified - Controls appliances up to 15A - Functions as a Z-Wave signal repeater - Grounded 3-pin AC power receptacle to enhance safety - Compact design - Over-the-air firmware upgrade available - Supports Network Wide Inclusion - Powered by Sigma Design 500 Series module inside - cULus Listed |
|
|
|
|
|
|
|
|
IOT Z-Wave Plug-in Dimmer Module - White - Height: 1-1/2" x Width: 2-1/8" x Length: 3-1/4" - Plug and Play, simple setup - Works with AC operated lamps incandescent and most dimmable fluorescent (CFL), or LED lighting - LED backlit key for manual ON/OFF and status indicator - GROUP/SCENE/ALL enabled, if supported by controller - Over-The-Air firmware upgrade available if supported by controller - Supports Network Wide Inclusion - Powered by Sigma Design 500 Series module inside - Compact design - Functions as a Z-Wave repeater - Can be controlled wirelessly or manually - cULus Listed |
|
|
|
|
|
|
|
|
Occupancy Sensor Accessory for LED Hi-Bay Fixture - White Finish - Power supply: 100/120/240/277VAC, 50/60Hz - Infrared sensor: Omni-directional quad element - Load switching: Zero-cross Hybrid-Switching - UL Classification: cULus - Listed |
|
|
|
|
|
|
|
|
Add-On Microwave Sensor for High Bay Fixtures |
|
|
|
|
